Electrical Actuator

Product Details:

We are the leading provider of 30 Nm Electrical Actuators. In combination with our selection of AC and DC controls and various motor transmission combinations, our actuators are designed for the best and most reliable quality performance for high and low power, industrial and precision applications.

Features:

• High efficiency
• Long life
• Hard coat anodizing for high corrosion resistance

Product Details:

We are Manufacturer, Supplier, Exporter of Quarter Turn Electric Actuators. We serve our customers from SAARC Countries. QT series of electrical Actuators from Marsh have been developed specially for the quarter turn operation of small size Butterfly, Ball, Plug valves and dampers. Thanks to their design simplicity to achieve low-cost automation. They are provided with single phase motors which considerably saves the cost of electrical hardware and other accessories.

Also as the actuators are installed directly on final control element and are provided with stall-duty motors, the units become completely maintenance free, that is Fit and Forget type. The units are supplied with all necessary features to operate the final control element in ON/OFF or modulating modes.

Features:

• Auxiliary limit switches - (1No + 1Nc) - 4 Nos.
• Torque limit switches (1No + 1Nc) - 2 Nos (for QT10 onwards)
• Three position switch for ON/OFF operation Field/Panel mounted
• Feed back Potentiometer
• Valve positioner - Field / Panel mounted Input : 4-20mA/0-10 V DC.
• Output : Proportional
• Two wire transmitter field /Panel mounted
• Input : From potentiometer in actuator - 100 to 235 ohms or 0-1000 ohms
• Output : 4-20 mA - Two wire
• IP 67 Protection
• Remote position indicator-Digital
• Space heater
• Special accessories on request

 

Note:

• We are also dealing in different models.

• Minimum order Value accepted : Rs. 1,55,000/-

Product Details:

Facilitated by technically advanced process, we are offering a precision engineered collection of Three Phase Quarter Turn Actuator which is used to actuate ball, plug and butterfly valves, louver dampers, flop gates, radial gates, butterfly gates and other device. Our offered actuator is precisely manufactured from the high grade material as well as modern technology by our skilled professionals. The provided actuator is carefully tested on various parameters by our quality examiners for ensuring its high strength.

Features:

• Rotating components supported by low-friction bearings
• Available for 360° operation
• Superior finish

Other Details:

• Modulating/ Regulating Types Models
• Safe Area Quarterturn QM0, QM1, Rotary actuator with supplementary
• Flame/Explosion Proof worm gear boxes Also TM0/WG & TM1/WG

Product Details:

Owing to our proficiency in this domain, we are providing our clients an optimum range of Flameproof Three Phase Electrical Actuator that is ideal for valve control, as well as many other applications in hazardous environments. The provided actuator is precisely manufactured using high class material and latest technology in synchronization with set industry standards. Before being delivered, the offered actuator is inspected on different quality measures to ensure its durability.

Features:

• Up to 90% efficiency and 100% duty cycle
• Engineered for high performance and long life
• Resistant against corrosion

Product Details:

Our client centric approach has enabled us in manufacturing immaculate range of Motorized Quarter Turn Electrical Actuator. These products have great industry application and have tremendous trouble shooting capability. Low maintenance, compact & space-saving design, low weight and longer service life are the salient features of these products. With our high-end machines and latest technologies, we are able to fabricate products as per set industry standards. Our affordable price policy helps in creating a loyal clientele across the country.

Features:

• Highly durable
• Robust construction
• High strength

Product Range :

Product Details:

We are Manufacturer, Supplier of Trunion Mounted Linear Actuators. These actuators are Positioning Devices suitable for operating large size dampers, flaps, shutters fan blades etc. from a remote control station in ON/OFF and Regulating modes. The Thruster units swivel either in one, two axis while imparting the Thrust, so as to achieve correct alignment with the final control element.

Standard Features:

• Electric motor TEFC, 3 phase, S-1 Duty.
• Insulation class
• Travel limit switches 2 Nos (1 NO + 1 NC)
• Torque limit switches 2 Nos (1NO + 1 NC)
• Continuous type local position indicator
• Hand wheel with clutch mechanism.
• Protection class IP 65
• Hammer blow effect

Product Details:

Backed ourselves with sound amenities and talented personnel, we have emerged as one of the leading organization engaged in offering wide assortment of 200Nm Electrical Actuator.

The offered actuator is used in waste water treatment plants, power plants, refineries, mining and nuclear processes and pipelines. This actuator is manufactured by our diligent professionals with the best quality material and cutting-edge technology. Furthermore, our provided actuator is available according to specific requirement of our precious clients.

Features:

• Robust construction
• Abrasion resistance
• Easy to fit

Product Details:

Fostered with a team of experienced professionals, we have been able to provide an exclusive Motorized Electrical Actuator With Integral Starter. Our provided valves are widely used in chemical and process industry. The offered valves are manufactured by our experienced professionals using optimum grade material and modern technology in tandem with set quality standards. Before the final delivery, our quality controllers check these valves against well-defined parameters.

Features:

• Dimensionally precise
• Less power consumption
• Easy to fit

Product Details:

With the assistance of our professionals, we are engaged in offering our clients a broad range of Multiturn Rotary Electrical Actuator that are used for operating the final control elements like valves or dampers to control the flow of fluids flowing through the pipes or ducts. Using the ultra-modern technology as well as top grade material, our offered actuators are manufactured by our deft professionals. These actuators are available in numerous sizes and finishes to cater the particular demands of our patrons.

Features:

• Continuous type local position indicator
• Handy wheel with clutch mechanism
• Hammer-blow effect

Standard Features:

• Electrical motor TEFC, 3ph, S-1 Duty
• Insulation Class 'F'
• Travel Limits Switches - 2 Nos.(1 NO + 1 NC)
• Torque Limits Switches - 2 NOs. (1 NO + 1 NC)
• Continuous type local position indicator
• Handwheel with clutch mechanism
• Protection class IP 65
• Hammer-blow effect
• Output couplings viz A/B/C/D/E as per DIN

Product Details:

We are Manufacturer, Supplier of Three Phase Actuators.

Product Details:

Running with a goal to fulfil the variegated demand of our valuable clients, we are affianced in offering defect free 20rpm Electrical Actuator. In compliance with industry standards, the provided actuator is manufactured using premium quality material with the aid of the latest technology at our production unit. Offered actuator is checked on various parameters by our quality experts in order to ensure its high strength. Moreover, this actuator is used for flow regulation in which the disc takes the form of disk.

Features:

• Anti-corrosive
• Excellent tensile strength
• Rugged structure

Product Details:

With the assistance of our professionals, we are engaged in offering our clients a broad range of Full Bore Electrical Actuator that are excellent choice for shutoff applications. Offered valves are manufactured with the aid of advanced technology using high grade material under the supervision of dexterous professionals. Apart from this, the provided valves are strictly checked against numerous quality measures by our quality auditors in accordance with set standards to ensure their optimum strength and long life.

Features:

• High strength
• Easy to install
• High tolerance

Product Details:

Owing to our vast experience and in-depth knowledge in the industry, we are offering high quality QT-5 Single Phase Quarter Turn Electrical Actuator that allows an almost unrestricted passage of the fluid and may also be opened incrementally to throttle flow. Under the instructions of our adept professionals, our offered valves are well-manufactured using the best-in-class material and innovative techniques in tandem with set market standards. Apart from this, we provide these valves in numerous sizes & dimensions according to our clients' need and in a predefined time frame at affordable price.

Features:

• Easy to fit
• Corrosion resistance
• Low maintenance

Product Details:

Globe Valves in various sizes & pressure ranges suitable for On/Off and control applications in the process Industry can be offered duly mounted with Electrical Actuators, depending upon the thrust requirements the actuators can be offered in Single or Three Phase Electric supply. The accessories such as Positioners, Feedback Transmitters, which are required for close loop systems can also be offered as a complete system.

Product Details:

We are Manufacturer, Supplier of M30 Electrically Operated Actuator. Our set up is situated in Pune, Maharashtra, India and majorly we serve our customers from SAARC Countries.

 

Optional Features:

• Electric motor- TESC,3ph,S2 OR S4 Duty
• Better class of insulation for motor
• Travel limit switches 2 NO+2 NC in place of 1 NO+1 NC-2 Nos
• Torque limit switch 2 NO + 2 NC in place of 1NO+1NC-2Nos
• Additional Travel limit switches (1 NO + 1 NC) - 4Nos(Extra) –or (2 No. + 2 NC - 2 Nos. extra)
• Feed back potentiometer
• Remote position indicators-Analogue / Digital / Bar graph
• Space heater
• Electromagnetic, Electronic brake for the motor
• Protection class IP67/IP68
• Various types of local & remote panels
• Foot mounting brackets
• Set of linkages
• Tailor made accessories to suit customer's specific requirements
• Thermostats in motor winding
• Field / Panel mounted source to Convert 220VACto 24 VDC required for transmitter
• Supplementary Spur Worm gear boxes
• Attachment for linear motion
• Retrofitting

Note:

• We are also dealing in different models.

• Minimum Order Value Accepted: Rs. 2,00,000/-